Homeworld Remastered Collector’s Edition Physical Items Support

If you are having trouble with any of the physical items included with your Homeworld Remastered Collector’s Edition, including the Pride of Higara Mothership Model, please view the troubleshooting guide below:


  • 1).  Mothership needs stabilization.

        Ensure the end of the pole marked “base” is properly inserted into the base – with flat side of pole matching up with flat side of base (forcing could cause damage and invalidate warranty).Ensure the end of the pole marked “ship” is properly inserted into the ship, with the front of the ship facing the front of the base.  Note:  The power switch and plug are on the back of the base.  The engine lights are on the back of the Mothership (Refer to the “Assembly and Usage” pamphlet for images and direction).


  • 2).  Mothership will not light up.

Make sure the Mothership is turned on.  (The “On-Off” switch is located on the back of the base).Gently, double-check that the barrel plug is completely inserted into the Mothership’s base and that the USB connector is fully inserted into your power source.


For more information on the Mothership, please contact:

Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request
Powered by Zendesk